Alarm - Ikco SAMAND Owner's Manual

ALARM

Warning message
Warning controls detectable problems
when the car starts running.
2 Two seconds after a problem occurs, the
driver is notified in two ways:
1. One can hear the audio warning
through the loud speaker
2. Video warning displays on the screen.
When the car is running, if any of the
following problems occurs corresponding
warnings are displayed and diffused:
1. The hand brake or brake liquid
should be controlled
2. Oil pressure is low
3. Replace the brake pad.
4. Water temperature is high
5. Doors are open
6.Turn off the lights
7. Change the engine oil
8.Change the oil filter
9.Change the air filter
56
Press the button to cut the warning
sound. The sign ( ) appears on the
screen. The warning message appears
but no sound is heard.
Button does not cut the message
related to the lights being left on and the
message will continue in all situations.
Theft-Deterrent
When the remote keyless is used to
lock the car, all doors, hood, the trunk lid
and fuel filler cap are locked and theft-
deterrent is activated. The message "the
anti-theft is active" appears on the screen
and the panel light or the corresponding
signal ( ) blinks on the instrument panel.
If you lock the doors with the key, theft-
deterrent system will not be activated.
In addition to the usual theft deterrent
means, the intelligent theft deterrent of
Samand is equipped with extra capabilities
as follows:
a) 4 digit code
b) Shock sensor with ability to be set up
by software
c) memory LED in two positions