Ikco SAMAND Owner's Manual page 123

WINDSCREEN WASHER & WIPER SYSTEM
4
1. Press down the blade so that it detaches
the catch, then pull out the blade.
Mounting the Wiper Blades
Replace the blades one by one, always
leave one wiper assembly intact to act as
a guide while replacing the other.
Grease, Silicon adhesives and oil products
impair the wiping performances. Wash the
blades with soap and warm water, and
check the blade regularly.
122
Caution
- In some systems pressurized water
penetrates in the doors and windows
sealing during washing the vehicle
and causes fault in locks. Never use
pressurized water directly on critical
parts.
-In the very cold temperature, make
sure the wiper blades are not frozen
(the wiper motor maybe damaged)
-It is a good idea to clean or replace
the wiper blade assembly on a regular
basis when they are worn out or
whenever the efficiency of wipers are
reduced.