Ikco SAMAND Owner's Manual page 155

CHANGING LAMPS
Front/Rear Courtesy Lamp *
5
Insert a screwdriver carefully in the rear slot
of the light, and lever to remove from the
holder. Hold the light assembly, and open
the holder. Take out the bulb, and replace it.
Make sure that the holder is tightly placed,
and then install the light assembly.
* If equipped
154
Warning
All the bulbs are vacuumed and maybe
broken at the time of changing them
and subsequently cause the wound.
Vanity Mirror Lamp*
The bulb cannot be replaced.Buy a new
replacement sunvisor from an authorized
dealer.