Ikco SAMAND Owner's Manual page 133

TIRE CHANGE
Spare Wheel and Its Tools
5
Remove the carpet from the bonnet floor
by lifting up the handle provided. Hook
up the handle on the trunk edge, under the
rear window.
Warning
- Jack is used to change tires. Under
no circumstances should it be used
to perform other operations such as
repairs or to access under the vehicle.
- If the spare tire is too old, show it to
an authorized representative to be
checked and ensure its proper condition
for risk free use.
132
The Spare Wheel
Release the supporting strap, and remove
the warning triangle and toolbox including
the tools. Remove the spare wheel.
Hazard Warning Triangle
Put the warning triangle 50 to 100 meters
behind the car beside the road when you
have a break down or a wheel. replacement
and need to stop the car. The distance
should be increased if there is anobstacle
as the crown of a hill.
Tools
1. Wheel brace
2. Central nipple
3. Jack wrench
The toolbox prevents the floor carpet
recession. Fasten the supporting strap to
prevent tools and the spare wheel moving.
In some models, other tools are provided
for general repairs in a special compartment
on the spare wheel.