Ikco SAMAND Owner's Manual page 142

Hide thumbs Also See for SAMAND:
Table of Contents

Advertisement

Fuse box
The fuse box locates in left rear of the
engine compartment near to the wiper
electromotor. Remove the cover to get
access the fuses.
Fuses
Fuses are simple circuit breakers that protect
electrical equipment being damaged.
The supporting fuse may be burnt whenever
electrical equipment does not operate.
Replacing Fuses
1. Turn off the ignition switch and all
electrical equipment.
2. Remove the fuse box cover, and then find
the defected fuse according to the table.
3. Take out the tweezers(located in the
fuse box), and use it to pull out the defected
fuse. A blown fuse can be recognized by a
break in the wire.
4. Replace a blown fuse with another of
the same or lower rating. Be aware that
there are a number of spare fuses located
along the lower side of the fuse box.
Caution
Any modification or change fuel
feeding systems ( Electronic Control
Unit, Wiring, Fuel Circuit, Injectors,
Protective covers, etc.) due to the
dangers that may threaten you, is
strictly prohibited. (Unless by experts
in After Delivery Service Network).
FUSES
5
141

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Samand elSamand lx

Table of Contents