Ikco SAMAND Owner's Manual page 66

Shock sensor display
By pressing and buttons, the
shock sensor sensitivity can be altered
from 0 to 100 (15&16). When the sensitivity
is 100, the theft-deterrent will be activated
even by the smallest shock .
On the opposite, when the sensitivity is
near to 0, the alarm will be activated only
after a heavy shock and if the "shock
sensors" are placed on 0, the alarm (sire)
will be totally deactivated.
Press this button to exit the menu.
Option menu 3: Security code setting
Press this button to navigate to Option
Menu 3. This menu allows the user to (17):
- Change the 4 digit code number.
- Reset the time allowed for keying in the 4
digit code number. - Activate or deactivate
the 4 digit code number.
ALARM
2
65