Rear Alarm System - Ikco RUNNA LX Owner's Manual

Table of Contents

Advertisement

1
Display Panel
This page shows the following information:
- Clock: Since 12 midnight to 12 at noon
points to AM and from 12 at noon to 12
midnight points to PM. The default is 1.00 AM.
- Date: The year could be set from 00 to
99, the month from 01 to 12. And the day
could be set from 01 to approximately 31.
The date default display is 01/01/91.
- Outside Temperature: If the temperature
is between +3 till – 3˚C, the sign blinks.
2
- The doors position: The door indicator
on display panel is blinking while each
door is open.
(Example: In up image, front left door is open).

Rear Alarm System

The system contains two intelligent
sensors (A) which is installed on the
vehicle bumper and is connected to the
interior electronic network of the vehicle
Adjusting the Parameters
Press the button (1) for 3 seconds to
enter adjusting menu.
CONTROLS
The information that is blinking is
changeable. In this case, by pressing
on the button (1) each time, one of the
following information could be adjusted:
The clock – the minute – the year – the
month – the day
By pressing the button (2), the mentioned
information is changed. If press the
button and hold it, statistics will increase
swiftly and by reaching the last no returns
to prime number again. If there is no
operation on display panel for 8 seconds,
the panel comes to normal position and
the information is recorded in it.
3
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents