Replacing Label Guide Adjustment Knob Assembly - Avery Dennison M09416 XLI Service Manual

M09416
Thermal Direct Printer

2.5. Replacing Label Guide Adjustment Knob Assembly

1. Please refer to 3.2 for disassembling the lower cover.
2. Shift the label guide to the center by rotating the label guide adjustment knob.
3. Use a flat screwdriver to press the nub to remove the label guide adjustment
knob.
Lower Inner Cover
Label Guide
3. Remove 4 screws.
Screws
XLI
® ®
Plastic Lami
Nub
nate
11
Label Guide
Adjustment Knob
Screws