Buttons; Feedback Display - SteelFlex XT-7600 User Manual

BUTTONS

1. :Press START to begin a manual or programmed workout.
2. :Use
tread belt speed.
3. : Use
treadmill.
4. :Press COOL DOWN at any time during a workout gradually
stops a workout.
5. :Accept variable setting.
6.
7. : Pulling the SAFTETY KEY magnet stops the treadmill
immediately.
NOTE: The clip end should be attached to clothing while using treadmill.
8. STOP/PAUSE/Hold To Reset
During workout, press STOP/PAUSE will gradually stop the
tread belt. If holding this button down for 3 seconds will reset
the treadmill.
10
to set program and variable setting/ adjust
to increase/decrease the elevation of
: One Touch speed select buttons. Indicated
as Kilometer per Hour.

FEEDBACK DISPLAY

1. TIME: Shown as Minutes:
Seconds. View
elapsed Time in
your workout.
2. CALORIES: Shown as
estimated accumulated
Calories burned during
workout.
3. DISTANCE: Shown as
miles or kilometers.
View Distance traveled
during workout.
4. PULSE:Shown as
Beats-per-Minute.
Monitor your hand
pulse at any time
during workout.
5. SPEED:Shown as Miles/Hour or Kilometers/Hour.
Indicate how fast the running surface is moving,
simulate outdoor running.
6. ELEVATION:Shown as percentage of incline.
Indicate how steep incline the running surface
is, simulate running on a hill.
7. PROFILE:Shown as a graphical
representation of the selected
program on the LED matrix window.
11