Table of Contents
Advertisement
1.10 Valve and Valve Spring - Remove
Using a valve spring pusher, compress the valve spring
evenly and remove the valve cotters.
Note: If valves are reusable, mark each valve seat and the
mating valve to identify their original positions. Do not
change the combination of the valve seat and the valve
when reassembling.
1.11 Nozzle Gland Stud Bolt and Bridge Guide - Remove
Do not remove the nozzle gland stud bolt and the bridge
guide from the cylinder head, unless they are defective.
If they are removed, see "Nozzle Gland Stud Bolt and
Bridge Guide - Inspect and Replace" of "INSPECTION
AND REPAIR OF BASIC ENGINE."
1.12 Fuel Connector - Remove
Do not remove the fuel injection connector, fuel leak-off
connector from the cylinder head unless they are found to be
defective.
Chapter 5 DISASSEMBLY OF BASIC ENGINE
Valve Spring - Compress
Valve and Valve Spring - Remove
Nozzle gland
stud bolt
Nozzle Gland Stud Bolt and Bridge Guide -
Remove
Fuel leak-off
connector
Fuel injection
connector
Fuel Connector - Remove
Valve spring pusher
P/N : 33591-04500
Valve cotter
Valve rotator
Valve spring
Stem seal
Bridge guide
5-7
Advertisement
Table of Contents
