Water Pump - Assemble - Mitsubishi S12A2 Service Manual

2.10 Water pump - Assemble

260 ± 12 N·m
{26 ± 1.2 kgf·m}
[191.8 ± 8.9 lbf·ft]
Apply sealant.
12.3 ± 2.5 N·m
{1.3 ± 0.3 kgf·m}
[9.07 ± 1.84 lbf·ft]
31.9 ± 2.5 N·m
{3.3 ± 0.3 kgf·m}
[23.53 ± 1.84 lbf·ft]
Unit seal (stationary side)
Unit seal (rotating side)
Water pump - Assemble
Chapter 10 COOLING SYSTEM
196 ± 29.6 N·m
{20 ± 3.0 kgf·m}
[144.6 ± 21.83 lbf·ft]
Apply LLC to the floating portion when
installing the unit seal (rotating side) into the ring.
Apply sealant (ThreeBond 1102) to
outer periphery of unit seal (stationary side).
Apply engine oil to the oil seal lip and
the balls of ball bearing.
Replace
44 ± 4.9 N·m
{4.5 ± 0.5 kgf·m}
[32.5 ± 3.61 lbf·ft]
10-31