2.11 Governor Drive - Assemble
Apply engine oil
Backlash
0.12 to 0.18 mm
[0.0047 to 0.0071 in.]
Apply engine oil
Apply engine oil to the lip
2.11.1 Backlash - Measure
Measure the backlash between each gear. If the value exceeds the limit, replace the gears with new ones.
Item
Backlash between drive gear and
idler gear
Backlash between driven gear
and idler gear
Backlash
0.12 to 0.18 mm
[0.0047 to 0.0071 in.]
Fuel injection pump
S3S spec
Governor Drive - Assemble
Standard value
Limit value
0.12 to 0.18 mm
0.50 mm
[0.0047 to 0.0071 in.]
[0.0197 in.]
0.12 to 0.18 mm
0.50 mm
[0.0047 to 0.0071 in.]
[0.0197 in.]
Apply engine oil to the lip
Fuel injection pump
S7S spec
294±15 N·m
{30±1.5 kgf·m}
[217±11 Ibf·ft]
294±15 N·m
{30±1.5 kgf·m}
[217±11 Ibf·ft]
Chapter 8 FUEL SYSTEM
Apply engine oil
8-31