Outside Diameter And Inside Diameter Of Bearing Fit - Inspect - Mitsubishi S12A2 Service Manual

2.13.1 Outside Diameter and Inside Diameter of Bearing Fit - Inspect

Turn the bearing and if turning is not smooth, replace the bearing with a new one.Inspect the fit of bearing case and bearing. If
heavy wear is found, replace them with new ones.Inspect the fit of shaft and bearing. If heavy wear is found, replace them with
new ones.
Item
Inside diameter of case bearing housing
Bearing
Outside diameter of shaft fit to bearing
Outside diameter
Inside diameter
Chapter 10 COOLING SYSTEM
Nominal value
ø72 mm [2.83 in.] 71.985 to 72.004 mm [2.8340 to 2.8348 in.]
ø72 mm [2.83 in.] 71.983 to 72.004 mm [2.8340 to 2.8348 in.]
ø30 mm [1.18 in.] 29.987 to 30.003 mm [1.1806 to 1.1812 in.]
ø30 mm [1.18 in.] 30.002 to 30.015 mm [1.1812 to 1.1817 in.]
Standard value
10-39