Table of Contents
Advertisement
Chapter 7 ASSEMBLY OF BASIC ENGINE
5.16 Fuel Injection Nozzle Assembly - Install
(1) Apply a thin coat of grease to the gasket and install it to
fuel injection nozzle.
(2) Insert the fuel injection nozzle to the cylinder head, and
temporarily tighten the nozzle gland.
(3) Tighten the nozzle gland nut to the specified torque so
that the inlet connector of fuel injection nozzle does not
contact the valve spring.
Note: Do not forget to install the gasket when installing fuel
injection nozzle assembly.
5.17 Fuel pipe - Install
(1) Tighten the fuel injection pipe.
(2) Tighten the eyebolt of fuel leak-off pipe with the speci-
fied torque.
(3) Fix the fuel injection pipe and fuel leak-off pipe with a
clamp.
7-36
Fuel leak off pipe
Fuel injection pipe
Gasket
Fuel Injection Nozzle - Install
17.5 ± 2.5 N·m
{1.8 ± 0.3 kgf·m}
[12.9 ± 1.8 lbf·ft]
Sealing
washer
Fuel leak off pipe
Fuel pipe - Install
Eye bolt
Nut
59 ± 2.9 N·m
{6 ± 0.3 kgf·m}
[43 ± 2.2 lbf·ft]
Nozzle gland
Fuel injection pipe
Clamp
Advertisement
Table of Contents
