Air Cooler - Disassemble, Inspect And Assemble (Pta2 Spec) - Mitsubishi S12A2 Service Manual

Chapter 11 INLET AND EXHAUST SYSTEMS
Replace
2
Replace
Disassembling Sequence
1 Air cooler cover
11-12
The gap between the element
and plate must be sealed with
KE45-W (Shin-Etsu Chemical Co.)
or equivalent silicon sealant.
1
The gap between the element
and plate must be sealed with
KE45-W (Shin-Etsu Chemical Co.)
or equivalent silicon sealant.
Air cooler - Disassemble, Inspect and Assemble
2 Air cooler element
(approx. 33 kg [73 lb])
3
3 Inlet manifold
(approx. 18 kg [40 lb])
PTA2 spec
Replace
Replace