Front Cover - Remove - Mitsubishi S12A2 Service Manual

Chapter 5 DISASSEMBLY OF BASIC ENGINE

3.4 Front Cover - Remove

When removing the oil seal (slinger portion), be careful
not to damage the crankshaft.If the crankshaft has a
flaw, oil will leak from its flaw even if new oil seal is
installed.
(1) Screw two jack bolts evenly into the jack bolt holes,
and remove the front cover from the crankcase,
(2) Remove the oil seal (seal lip portion) from the front
cover.
(3) Remove the oil seal (slinger portion) from the crank-
shaft by tapping lightly or prying it.
5-16
Pointer
Bolt
Front cover
Oil seal
Front Cover - Remove
Jack bolt
(M10 × 1.5 mm)