Table of Contents
Advertisement
Chapter 7 ASSEMBLY OF BASIC ENGINE
4.15 Pickup - Install
(Electronic governor spec)
(1) Turn the crankshaft to move the ring gear teeth top to
the center line of pickup installing hole.
(2) Insert the pickup into the hole slowly and carefully by
hand.
(3) When the tip of pickup contacts with the ring gear tooth
top, loosen the pickup to adjust the clearance to stan-
dard value.
(4) Fix the pickup with lock nut.
7-26
Timing gear case
Lock nut
One back-turn after
bottoming end
Ring gear
Pickup - Install
Advertisement
Table of Contents
