Service, Maintenance; Remove Protective Glass Guard - KERN DBS 60-3 Operating Instructions Manual

13.2 Service, maintenance

 The appliance may only be opened by trained service technicians who are
authorized by KERN.
 Ensure that the balance is regularly calibrated, see chap. Testing
instruments control.

13.2.1 Remove protective glass guard

+ Avoid contact with halogen lamp and sensor!
+ Handle protective glass guard with care.
Attention: Risk of breakage
+ Risk of cuts.
1. Open heated cover.
2. Undo the screws marked with arrows with the
hexagonal socket wrench included in the scope
of supply.
84 DBS-BA-e-1311