Exerpeutic 1110.6 Owner's Manual page 14

Step 5
Remove the two Curve Washers (30) and two Hexagon Socket Bolts (83) from the
Handlebar (82). Then attach the Handlebar (82) onto the Back Cushion Frame (78) with
the two Curve Washers (30) and two Hexagon Socket Bolts (83) that were removed.
Tighten the bolts with the 5mm Allen Wrench with Phillips Screwdriver provided.
Connect the Hand Pulse Wire (91) from the Handlebar (82) to the Connection
Wire B (92) from the Seat Post (5) as shown in Fig. AA-3.
ASSEMBLY
Tool:
12
5mm Allen Wrench with Phillips
Screwdriver