Table of Contents
Advertisement
Instruction Manual
3. While holding the cowl firmly in position, drill
four 1,6mm pilot holes through both the cowl
and the side edges of the firewall.
4. Using a 3mm drill bit, enlarge the four holes in
the cowling.
! !
Enlarging the holes through the cowl will prevent
the fiberglass from splitting when the mounting
screws are installed.
5. Slide the cowl back over the engine and secure
it in place using four 3mm x 12mm wood
screws.
C.A glue
Screw
61
62
INSTALLING THE CONTROL AIR SYSTEM
1. Install the servo to the fuselage.
63
12
SUPER CONSTELLATION
64
65
66
67
Advertisement
Table of Contents
