Auto Orientation - Canon imageRUNNER 2320 Copying Manual

Auto Orientation

If <Auto Orientation> is set to 'On', the machine uses information such as the size
of the original and the copy ratio to determine the most suitable orientation for the
specified paper size, and then automatically rotates the image, if necessary.
NOTE
• The default setting is 'On'.
• If you select the paper size manually, the Automatic Orientation print cannot be made
even if you set <Auto Orientation> to 'On' from the Copy Settings menu.
• If the Different Size Originals mode is set in combination with the Auto Paper Selection
mode, Auto Orientation is not performed.
3
• If the size of the original is not detected, the image is not rotated, even if <Auto
Orientation> is set to 'On'.
• If A4 or A5 originals are enlarged onto A3 paper, Auto Orientation is not performed even
if you select 'On'.
• Only the images on standard size originals, up to A4 paper, can be rotated when the
copy ratio is set to 100%.
• If the Auto Paper Selection mode is set and the most suitable paper size is not available,
the paper source that is loaded with paper of the same size, even if the orientation is
different, is displayed as the optimal paper to use.
1
Press
<Copy Settings> ➞ press [OK].
For help, see steps 1 and 2 of "Image Orientation," on p. 3-2.
2
Copy Settings
3

Auto Orientation

3-4
Making Copy Settings
(Additional Functions) ➞ use [
Image Orientation
Auto Orientation
Standard Settings
Sharpness
Off
On
] or [ ] to select
Use [ ] or [ ] to select <Auto
Orientation> ➞ press [OK].
The Auto Orientation menu appears.
Use [ ] or [ ] to select <Off> or
<On> ➞ press [OK].
The selected mode is set, and the LCD
display returns to the Copy Settings menu.