Canon imageRUNNER 2320 Copying Manual page 102

● If the Finisher-U2 is not attached:
Finishing
Paper Select
3
NOTE
If the usable paper is not set, a message to prompt you to select another paper source
that the usable paper is set. Select the proper paper source. If the usable paper is not set
in any drawers or the stack bypass, set the usable paper in the paper source(s) and
press [OK].
4
Press
3-16
Making Copy Settings
Group
Collate
Rotate+Group
Rotate+Collate
Stack Bypass
A4
A4R
A3
(Reset) to return to the Standby display.
❑
Use [ ] or [ ] to select <Group>,
<Collate>, <Rotate + Group>, or
<Rotate + Collate> ➞ press [OK].
If you have selected <Group> or
<Collate>, proceed to step 4.
If you have selected <Rotate + Group> or
<Rotate + Collate>, proceed to the Paper
Select menu shown below.
❑
Use [ ] or [ ] to select the paper source
➞ press [OK].
The selected mode is set, and the LCD
display returns to the Standard Settings
menu.