Finishing - Canon imageRUNNER 2320 Copying Manual

Finishing

You can set the standard Finishing mode. The <Finishing> setting is under the
Standard Settings menu.
IMPORTANT
• The Rotate + Collate mode can be used when:
- Both A4 and A4R paper sizes are loaded in the paper drawers or loaded in the stack
bypass.
- The paper drawers or the stack bypass to be used for the Rotate modes are set to
<On> in <Auto Drawer Select> in the Common Settings menu. (See Chapter 3, "Useful
Functions and Settings," in the Reference Guide.)
• If the optional Finisher-U2 is attached, the Rotate + Collate mode is not available.
NOTE
The default setting is 'Group'.
1
Press
<Copy Settings> ➞ use [
➞ press [OK].
The Standard Settings menu appears.
For help, see steps 1 to 3 of "Number of Copies," on p. 3-5.
2
Standard Settings
Paper Select
Image Combination
Differ. Size Orig

Finishing

3
Select a Finishing mode.
● If the Finisher-U2 is attached:
Finishing
Group
Collate
Staple
Offset+Group
(Additional Functions) ➞ use [
] or [
] or [ ] to select
] to select <Standard Settings>
Use [ ] or [ ] to select
<Finishing> ➞ press [OK].
The Finishing menu appears.
❑
Use [ ] or [ ] to select <Group>,
<Collate>, <Staple>, <Offset + Group>, or
<Offset + Collate> ➞ press [OK].
The selected mode is set, and the LCD
display returns to the Standard Settings
menu.
Making Copy Settings
3
3-15