Canceling A Copy Job; Using The Stop Key - Canon imageRUNNER 2320 Copying Manual

Canceling a Copy Job

There are several ways to cancel a job. This section describes how to cancel a job
using the Stop key and using the System Monitor screen.
NOTE
Several copies may be output even after you canceled a job.

Using the Stop Key

Using the Stop key, you can cancel a copy job.
1
Press
● If
the machine is handling only one
❑
Proceed to step 4.
● If the machine has multiple
❑
Proceed to step 2.
2
Status
Copy
Printer
Report
Copy
NOTE
• The current job is listed first on the Status screen.
• The LCD display can display characters in ASCII code. Using other character codes may
cause characters garbled on the LCD display.
• The messages displayed on the Status screen are as follows:
- <Printing> = Current job
- <Paused> = Current job that has been temporarily stopped by pressing
- <Waiting> = Reserved jobs
(Stop).
jobs
Paused
Waiting
Waiting
Waiting
:
job
:
Use [ ] or [ ] to select the job
you want to cancel ➞ press [OK].

Canceling a Copy Job

1
(Stop).
1-23