Canon imageRUNNER 2320 Copying Manual page 25

6
Press (Start).
● If the original is placed in the optional feeder:
Copying starts.
❑
Proceed to step 7.
IMPORTANT
You cannot change copy mode settings, such as the copy quantity, paper size, and
copy ratio, while the machine is copying.
NOTE
• If there is a current job, the machine scans the original and waits to print it. Printing
starts when the current job is complete.
• You can specify copy settings and scan originals while the machine is in the waiting
state, such as when the machine has just been turned ON, after a paper jam is
cleared, or after a cover on the main unit or an optional unit is closed. Copying
automatically begins as soon as the machine is ready.
• If the message <Memory full> appears on the LCD display, divide your originals into
several sets and copy them separately.
● If the original is placed on the platen glass:
Original Size
A4
A4R
A3
A5
Scanning and Printing
Done
Cancel
SheetXCopy: 0X 0/ 5
Copy Ratio: 100%
IMPORTANT
You cannot change copy mode settings, such as the copy quantity, paper size, and copy
ratio, while the machine is copying.
❑
Use [ ] or [ ] to select the size of the
placed original ➞ press [OK].
Copying starts.
If you want to cancel the job, use [ ] or [ ]
to select <Cancel> ➞ press [OK] ➞ use [ ]
or [ ] to select <Yes> ➞ press [OK].
There are several ways to cancel jobs. For
more information, see "Canceling a Copy
Job," on p. 1-23.
Basic Copying
1
1-13