Making Binding Erase Copies - Canon imageRUNNER 2320 Copying Manual

Making Binding Erase Copies

1
Place your original on the platen glass.
2
Press (Frame Erase).
The Frame Erase menu appears.
3
Frame Erase
Off
Org. Frame Erase
Book Frame Erase
Binding Erase
4
Binding Erase
Top
Left
Right
Bottom
5
Erase Width
(3-20)
The selected mode is set, and the LCD display returns to the Standby display.
To cancel this setting, press
press [OK].
Use [
Erase> ➞ press [OK].
The Binding Erase menu appears.
Use [
where the binding holes are
located ('Top', 'Left', 'Right', or
'Bottom') ➞ press [OK].
The <Erase Width> window appears.
Use [
width ➞ press [OK].
18 mm
• You can set the erase width from 3 mm
• The default setting is 18 mm.
(Frame Erase) ➞ use [ ] or [ ] to select <Off> ➞
] or [ ] to select <Binding
] or [ ] to specify the side
NOTE
To determine the border position of the
original, look at the original with its face
up.
] or [ ] to set the erase
NOTE
to 20 mm.
Frame Erase
2
2-37