Canon imageRUNNER 2320 Copying Manual page 84

Erase Width
2
NOTE
• You can set each erase width from 1 mm to 50 mm.
• The default setting for each side is 4 mm and for the Center Erase Width 10 mm.
3
Book Size
4
Enter the desired copy quantity (from 1 to 99) using
(numeric keys).
5
Press
Copying starts.
NOTE
• To cancel all settings and return to the Standby display, press
• To cancel a copy job, see "Canceling a Copy Job," on p. 1-23.
2-36
Frame Erase
(1-50)
A4
A4R
A3
A5
(Start).
❑
Use [ ] or [ ] to set the erase width ➞
press [OK].
The LCD display returns to the Org.
4 mm
Frame Erase menu for you to set the
erase width of the other sides if
necessary.
To set the erase width of the other sides,
repeat the previous and this step.
When you have set the desired sides,
select <Set> ➞ press [OK].
The Book Size menu appears.
Use [
size when it is open ➞ press [OK].
The selected mode is set, and the LCD
display returns to the Standby display.
To cancel this setting, press
Erase) ➞ use [ ] or [ ] to select <Off> ➞
press [OK].
] or [ ] to select the book
(Frame
-
(Reset).