Finishing - Canon imageRUNNER 1750 Copying Manual

Finishing

The Finishing modes enable you to make copies in sets arranged in page order
(Collate) or in groups of each page (Group). You can also staple copies (Staple).
The Collate mode or Group mode can be set in combination with the Offset mode.
The table below shows all the Finishing modes that are available with the optional
Staple Finisher-H1, and the paper sizes that can be used.
N/A: Not Available
Finishing Mode
Staple Finisher-H1
Not attached
Attached
* Indicates the maximum number of sheets that can be stapled when you are using 21 lb bond (80 g/m
NOTE
For more information on the optional Staple Finisher-H1, see Chapter 4, "Optional
Equipment," in the Reference Guide.
■ Collate Mode
The copies are automatically collated into sets arranged in page order.
Originals
Collate/Group
Without Offset
LTR, LGL, STMT,
EXEC
Three Copies
of Each Page
Collated in
Page Order
1
2
3
4
With Offset
N/A
LTR, LGL, EXEC
Set 1 Set 2
1 1
2 2
3 3
4 4
Staple
N/A
LTR, LGL, EXEC
(50 sheets)*
2 ) paper.
Set 3
1
2
3
4
2-25

Finishing

2