Ethernet Commands - D-Link DAP-3220 Reference Manual

Get Command:
get hostipaddr Display Host IP Address
get ipaddr Display IP Address
get ipmask Display IP Network/Subnet Mask
get gateway Display Gateway IP Address
get lcp Display Link Integrate state
get lcplink Display Ethernet Link State
get dhcpc Display DHCP Client State of enabled or disabled
Set Command:
set ipaddr Set IP Address
set ipmask Set IP Network/Subnet Mask
set gateway Set Gateway IP Address
set dhcpc Set DHCP Client State of enable or disabled
802.11 b/g Access Point Command Line Interface Manual
Function
Function
8
4
E
THERNET
Syntax
get hostipaddr
get ipaddr
get ipmask
get gateway
get lcp
get lcplink
get dhcpc
Syntax
set ipaddr <xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set ipmask < xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is Network mask
set gateway <xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set dhcpc [0:1]
Explanation: 0=disable:1=enable
C
OMMANDS