Time Display & Sntp Commands - D-Link DAP-3220 Reference Manual

Command:
timeofday Displays the Current Time of Day
Get Command
get sntpserver Display SNTP/NTP Server IP Address
get tzonelist Display Time Zone
get tzone Display Time Zone Setting
get daylightsaving Display Day Light Saving Time
Set Command
set sntpserver Set SNTP/NTP Server IP Address
set tzone Set Time Zone Setting
set daylightsaving Set Day Light Saving Time
802.11 b/g Access Point Command Line Interface Manual
Function
Function
Function
25
13
T D & SNTP C
IME ISPLAY
Syntax
Timeofday
Note: Need to set up SNTP/NTPserver firstly
Syntax
get sntpserver
get tzonelist
get tzone
get daylightsaving
Syntax
set sntpserver <xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set tzone [0=GMT]
Note: use get tzonelist to get tzone information
set daylightsaving [0:1]
Explanation: 0=disable:1=enable
OMMANDS