Smtp Commands - D-Link DAP-3220 Reference Manual

Get Command
get smtplog Display SMTP with Log Status (enabled or disabled)
get smtpserver Display SMTP server (IP or Name)
get smtpsender Display Sender
get smtprecipient Display Recipient Email Address
Set Command
set smtpserver Set SMTP Server
set smtpsender Set SMTP Sender Account
set smtprecipient Set SMTP Recipient Email Address
set smtplog Set SMTP With Log Status
802.11 b/g Access Point Command Line Interface Manual
Function
Function
29
16
SMTP C
Syntax
get smtplog
get smtpserver
get smtpsender
get smtprecipient
Syntax
set smtpserver <DNS name::xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set smtpsender <sender Email address>
set smtprecipient <recipient Email address>
set smtplog 0/1
Explanation: 0=disable:1=enable
OMMANDS