D-Link DAP-3220 Reference Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. DAP-3220
  6. Reference manual
D-Link DAP-3220 Reference Manual

D-Link DAP-3220 Reference Manual

802.11b/g access point
Hide thumbs Also See for DAP-3220:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual
F
DAP-3220
802.11b/g Access Point
Command Line Interface Reference Manual
First Edition (January 2006)
RECYCLABLE

Advertisement

Table of Contents
loading

Related Manuals for D-Link DAP-3220

Summary of Contents for D-Link DAP-3220

  • Page 1 DAP-3220 802.11b/g Access Point Command Line Interface Reference Manual First Edition (January 2006) RECYCLABLE...

  • Page 2: Table Of Contents

    Table of Contents Using the CLI ..................................................1 Command Syntax ................................................. 5 Utility Commands ................................................7 Ethernet Commands ................................................8 Wireless Commands ................................................9 Multi-SSID and VLAN Commands ........................................... 14 Access Control List Commands ............................................17 Radius & Accounting Server Commands .......................................... 18 DHCP Server Commands ..............................................

  • Page 3: Using The Cli

    The DAP-3220 can be accessed by Telnet. Using Microsoft Windows Operation system as example, open the Command Prompt on the computer that will be used for configuring and managing the AP and enter telnet and IP address of DAP-3220 in the first line. Using the default IP address as example, enter telnet 192.168.0.50 to cause the following screen to open: Press Enter in the screen above.
  • Page 4 802.11 b/g Access Point Command Line Interface Manual Type “admin” for the D-Link Access Point login username in the screen above and press Enter. The following screen opens: Press Enter as there is no initial password. The following screen opens to indicates you have successfully logged into the DAP-3220.
  • Page 5 802.11 b/g Access Point Command Line Interface Manual There are a number of helpful features included in the CLI. Entering the “?” command and then pressing Enter will display a list of all of the top-level commands. The same information can also be displayed by entering “help”. Press Enter to see a list of all the available commands.
  • Page 6 802.11 b/g Access Point Command Line Interface Manual When you enter a command without all of its required parameters, the CLI will prompt you with a list of possible completions. For example, if “tftp” was entered, the following screen opens: This screen displays all the possible command completions for “tftp”...

  • Page 7: Command Syntax

    802.11 b/g Access Point Command Line Interface Manual OMMAND YNTAX The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available through the console interface uses the same syntax. Note: All commands are case-insensitive.
  • Page 8 802.11 b/g Access Point Command Line Interface Manual : colon Purpose Separates two or more mutually exclusive items in a list, one of which must be entered. Syntax set antenna <1:2:best> Description In the above syntax example, you must specify either 1, 2 or best.

  • Page 9: Utility Commands

    802.11 b/g Access Point Command Line Interface Manual TILITY OMMANDS Help Command: Function Syntax help Display CLI Command List help or ? Ping Command: Function Syntax ping Ping ping <xxx.xxx.xxx.xxx> Restart and Exit Commands: Function Syntax set factorydefault Restore to Default Factory Settings set factorydefault Reboot Access Point.

  • Page 10: Ethernet Commands

    802.11 b/g Access Point Command Line Interface Manual THERNET OMMANDS Get Command: Function Syntax get hostipaddr Display Host IP Address get hostipaddr get ipaddr Display IP Address get ipaddr get ipmask Display IP Network/Subnet Mask get ipmask get gateway Display Gateway IP Address get gateway get lcp Display Link Integrate state...

  • Page 11: Wireless Commands

    802.11 b/g Access Point Command Line Interface Manual IRELESS OMMANDS Fundamental Config Commands: Function Syntax Select WLAN Adapter to configure. DWL-3220AP only WLAN 1 is config wlan config wlan [0:1] available for configuration. This command is not necessary. Find Commands: find bss Perform Site Survey, Wireless service will be disrupted find bss...
  • Page 12 802.11 b/g Access Point Command Line Interface Manual get availablechannel Display available Radio channels get availablechannel get rate Display current Data Rate selection. Default is best. get rate get beaconinterval Display Beacon Interval get beaconinterval get dtim Display Delivery Traffic Indication Message Beacon Rate get dtim get fragmentthreshold Display Fragment Threshold in bytes...
  • Page 13 802.11 b/g Access Point Command Line Interface Manual set beaconinterval Modify Beacon Interval 20-1000 set beaconinterval [20-1000] set dtim Set Delivery Traffic Indication Message Beacon Rate. Default is 1 set dtim <1-255> set fragmentthreshold Set Fragment Threshold set fragmentationthreshold <xxxx> set rtsthreshold Set RTS/CTS Threshold in bytes set rtsthreshold <xxxx>...
  • Page 14 802.11 b/g Access Point Command Line Interface Manual Display Source Of Encryption Keys: Explanation: get keysource Response Flash Memory for static key get keysource Response Key Server for dynamic key Response mixed for mix static and dynamic key get key Display specified WEP encryption Key get key [1-4] get keyentrymethod...
  • Page 15 802.11 b/g Access Point Command Line Interface Manual set wmmParamBss ac [AC number] [logCwMin] [logCwMax] [aifs] [txOpLimit] [acm] [ack-policy] Expanation: set wmmParam ac Set WMM (EDCA) parameters used by this AP AC number: 0->AC_BE 1->AC_BK 2->AC_BK 3->AC_BK...

  • Page 16: Multi-Ssid And Vlan Commands

    802.11 b/g Access Point Command Line Interface Manual -SSID VLAN C ULTI OMMANDS Get Command: Function Syntax get vlanstate Display Vlan State status (enabled or disabled) get vlanstate get vlanManage Display manage AP with VLAN Mode get vlanManage get nativevlan Display Native Vlantag get nativevlan get Vlanpristate...
  • Page 17 802.11 b/g Access Point Command Line Interface Manual get multi-idv-acct-port [index] Dislay Individual Accounting Server Port for Multi-SSID get multi-idv-acct-port [index] Set Command: Function Syntax set vlanstate [disable:enable] set vlanstate Enable or Disable VLAN Note: Must Enable Multi-SSID firstly set vlanManage Set manage AP with VLAN Mode set vlanManage [disable: enable] set nativevlan...
  • Page 18 802.11 b/g Access Point Command Line Interface Manual Routing Commands (Spanning Tree Protocol) Set Command: Function Syntax rstp setstate Enable or Disable Spanning Tree Protocol supporting in VLAN / Multi- rstp setstate [0:1] SSID Explanation: 0=disable:1=enable rstp getstate Show Spanning Tree State rstp getstate rstp setstp maxage [6 –...

  • Page 19: Access Control List Commands

    802.11 b/g Access Point Command Line Interface Manual CCESS ONTROL OMMANDS Del Command: Function Syntax del acl Delete specified Access Control List entry del acl [1-16] del wdsacl Delete specified WDS ACL entry: 1-8 del wdsacl [1-8] Get Command: Function Syntax get acl Display Access Control Setting of Enabled or disabled...

  • Page 20: Radius & Accounting Server Commands

    802.11 b/g Access Point Command Line Interface Manual & A ADIUS CCOUNTING ERVER OMMANDS Get Command: Function Syntax get radiusname Display RADIUS server name or IP address get radiusname get radiusport Display RADIUS port number get radiusport get radiussecret Display RADIUS shared secret get radiussecret get radius2ndstate Display the second RADIUS Mode (enabled or disabled)
  • Page 21 802.11 b/g Access Point Command Line Interface Manual set accountingport < xxxxx> set accountingport Set Accounting port number Explanation: < xxxxx> is port number, default value is 1813 set accounting2ndstate Enable or Disable the second Accounting server function set accounting2ndstate [disable:enable] set accounting2ndname <DNS name::xxx.xxx.xxx.xxx>...

  • Page 22: Dhcp Server Commands

    802.11 b/g Access Point Command Line Interface Manual DHCP S ERVER OMMANDS Command: Function Syntax dhcps help Display DHCP Server Command Help dhcps help dhcps state get DHCP Server state dhcps state dhcps state <on|off> set to on or off DHCP Server dhcps state [on|off] dhcps dynamic info get current settings...

  • Page 23: Rogue Ap Detection Commands

    802.11 b/g Access Point Command Line Interface Manual AP D OGUE ETECTION OMMANDS Command Function Syntax find rogue Find rogue AP find rogue rogue add Add a Rogue Access Point Result Entry rogue add <index> Del a Rogue Access Point Result Entry from the scanned result(in rogue del rogue del <index>...

  • Page 24: Snmp Commands

    802.11 b/g Access Point Command Line Interface Manual OMMANDS Command Function Syntax get snmp Display SNMP Agent Status get snmp set snmp Set SNMP State set snmp [disable:enable] snmp adduser <Username> <GroupName> [AuthProtocl] [Authkey] [PrivProtocl] [PrivKey] Explanation: snmp adduser Add User To SNMP Agent AuthProtocl: 1 Non, 2 MD5, 3 SHA Autheky: Keystring or none PrivProtocl:1 none, 2 DES...
  • Page 25 802.11 b/g Access Point Command Line Interface Manual snmp editpubliccomm Edit public communication String snmp editpubliccomm <publicCommunityString> snmp editprivatecomm Edit private communication String snmp editprivatecomm <publicCommunityString> snmp addcomm <CommunityString> <ViewName> [Type] Explanation: snmp addcomm Add Communication String CommunityString: <string> ViewName:<string> Type:1: Read-Only, 2: Read-Write snmp delcomm Delete Community String...

  • Page 26: Trap Commands

    802.11 b/g Access Point Command Line Interface Manual OMMANDS Get Command Function Syntax get trap Display TRAP Information get trap Set Command Function Syntax set trap state 0/1 set trap sysstate 0/1 set trap wlanstate 0/1 set trap mempoor-period x(1~30 mins) set trap bcflood-period x(1~30 mins) set trap Set Trap settings...

  • Page 27: Time Display & Sntp Commands

    802.11 b/g Access Point Command Line Interface Manual & SNTP C ISPLAY OMMANDS Command: Function Syntax Timeofday timeofday Displays the Current Time of Day Note: Need to set up SNTP/NTPserver firstly Get Command Function Syntax get sntpserver Display SNTP/NTP Server IP Address get sntpserver get tzonelist Display Time Zone...

  • Page 28: Telnet & Ssh Commands

    802.11 b/g Access Point Command Line Interface Manual & SSH C ELNET OMMANDS TFTP Commands: Command: Function Syntax tftp get Get a file from TFTP Server. tftp get Filename<string> tftp uploadtxt Upload the configuration of the device to TFTP Server. tftp uploadtxt Filename<string>...
  • Page 29 802.11 b/g Access Point Command Line Interface Manual ssh setalgorithm [0 -12] [enable/disable] Explanation: Algorithm: 0:3DES 1:AES128 2:AES192 3:AES256 4:Arcfour 5:Blowfish 6:Cast128 ssh setalgorithm Set SSH Algorithm 7:Twofish128 8:Twofish192 9:Twofish256 10:MD5 11:SHA1 12:Password) Example: 1. Disable 3DES algorithm support ssh setalgorithm 0 disable...

  • Page 30: System Log Command

    802.11 b/g Access Point Command Line Interface Manual YSTEM OMMAND Get Command Function Syntax get syslog Display Syslog Information get syslog Set Command Function Syntax set syslog remoteip <xxx.xxx.xxx.xxx> set syslog remotestate [0:1] set syslog localstate [0:1] set syslog sysstate [0:1] set syslog Set Syslog setting set syslog wirelessstate [0:1]...

  • Page 31: Smtp Commands

    802.11 b/g Access Point Command Line Interface Manual SMTP C OMMANDS Get Command Function Syntax get smtplog Display SMTP with Log Status (enabled or disabled) get smtplog get smtpserver Display SMTP server (IP or Name) get smtpserver get smtpsender Display Sender get smtpsender get smtprecipient Display Recipient Email Address...

  • Page 32: First-Time Configuration Examples

    The following AP configuration examples are provided to help first-time users get started. The user commands are in bold for easy reference. Many users will want to set a new IP address for the DAP-3220. This will also require setting an IP mask and a Gateway IP address. The following is an example in which the AP’s default IP address of 192.168.0.50 is changed to 192.168.0.55.
  • Page 33 The following is an example in which the authentication is set to Shared-Key. D-Link Access Point wlan1 -> set authentication shared-key Authentication Type: Shared-Key D-Link Access Point wlan1 -> set key 1 40 1234567890 Shared Key 1, size 40: 1234567890 D-Link Access Point wlan1 -> set key 1 default Default Key: 1 D-Link Access Point wlan1 ->...
  • Page 34 802.11 b/g Access Point Command Line Interface Manual Passphrase confirmed The following is an example in which the authentication is set to WPA. D-Link Access Point wlan1 -> set authentication wpa Authentication Type: WPA D-Link Access Point wlan1 -> set encryption enable Encryption: Enabled D-Link Access Point wlan1 ->...
  • Page 35 802.11 b/g Access Point Command Line Interface Manual...

Table of Contents