Introduction And Overview; Documentation Conventions - Electronics Line iconnect User Manual

1.

Introduction and Overview

This user manual explains all you need to know about your iConnect
and provides step-by-step instructions for all the system's user functions. In addition to
the explanation you will receive from your installer, we urge you to read this manual so
that you can take full advantage of your system's features. Keep this manual in an
accessible location for future reference.
The iConnect system has many features in order to suit a wide range of applications.
This manual outlines all of these features but it is likely that there are options that are
not relevant to your system. If you have any questions regarding the availability of the
features described in the manual, please ask your installer.
1.1.

Documentation Conventions

In order to simplify the procedures that appear in the rest of this manual, the following
conventions are used:
Item...
Select...
From the Event
Log Menu, select
Clear Log.
From the Service
menu, select Set
Time/Date, Set
Date.
[7012]
[#5]
√ , buttons
5. Interface Test
Description...
Use the arrow buttons to scroll through the options and
press √.
Enter the main menu by pressing √ and entering your
user code. Using the arrow buttons, navigate until you
reach Event Log and press √. Using the arrow buttons,
navigate until you reach Clear Log and press √.
The same as above only this time you are navigating
through three menu levels.
The shortcut to a specific menu item from the main menu.
In this case, this is the shortcut for Set Date. These
appear in the procedures as an additional aid to menu
navigation.
A shortcut to a specific item in a sub-menu. For example,
[#5] is the shortcut to Bell enable disable in the sub-
menu that is opened once you have selected the detector
you want to program.
Indicate buttons that appear on the keypad (
The text that actually appears on the LCD display (italics).
Note
Important caution, please pay attention.
-6-
security system
, )