Appendix B: Glossary - Electronics Line iconnect User Manual

Appendix B: Glossary

24hr Zone
Armed
Arming Keys
Bypassed Zone
Cancel Key
Cancel Report
Cellular
Communication
Chime
Code
Controlled Code
Delay
Descriptor
Disarmed
Duress Code
Entry Delay
Event Log
Exit Delay
A detector which is always active regardless of whether the system
is armed or disarmed.
A
The state during which the security system is activated. In most
cases, when the system is armed, triggering a detector generates an
alarm.
The three keys on the front panel or keypad that activates one of the
system's arming options.
B
A detector which is ignored by the system. No alarm is generated
from a bypassed zone even if triggered when the system is armed.
C
A key on the Wireless Keypad that causes the system to disregard
any partially entered code or command that may have mistakenly
been entered.
An operation that clears all communication buffers and stops the
transmission of any pending messages to the monitoring service.
Monitoring and control via a cellular network.
A feature that provides audible annunciation when specific detector
s are activated.
See User Code
A user code that causes the system to notify the monitoring service
when used to arm or disarm.
D
The exit/entry delay times that allow the user to arm or disarm the
system without generating an alarm.
Custom labels programmed for each user code, zone, keyfob,
keypad etc.
The state during which the security system is deactivated. During
disarm only detectors that are defined as 24hr, Panic, Medical, Fire,
Gas, Flood and Environmental are capable of generating an alarm.
A user code that generates a silent alarm to indicate that the user is
being forced to operate the system.
E
See Delay
A browsable record of events that have occurred within the system.
See Delay
-48-