Electronics Line iconnect User Manual page 46

Global Chime
Each detector can be programmed by your installer to cause the system to chime when
activated. This feature is active only when the system is disarmed. For example, the
system can be programmed to sound a chime each time the front door is opened or
closed. The Global Chime option enables you to turn this feature on and off.
To enable or disable Global Chime:
1. From the Service menu, select Global Chime [709].
2. Select either Enable or Disable.
Press √ when the desired setting is displayed.
3.
Global Chime can also be accessed via a convenient shortcut without needing to enter a
valid user code. To access the Global Chime option from Standby mode, press
then .
Remote Firmware Update
The Remote Firmware Update command enables a user with Master code authorization
to initiate the update from a remote PC using WEB communication.
Note: to enable this feature, contact your installer.
To initiate Remote Firmware Update:
From the Programming menu, select Service, Remote Software Update
•
[710]; a 24-hours time window is opened during which the Remote
Firmware Update may be performed.
IP Display
When using Ethernet connection, you can view the LAN IP address of the Control
System, i.e. the address that your home router has assigned to the Control System.
To display the IP Address:
From the Programming menu, select Service, IP Display [711]; the
•
LAN IP address of the Control System is displayed.
-46-