Unconnected Calls - Tait TM9100 Series P25 User Manual

Unconnected calls

Radio behavior
System
queued
Busy channel
now free
The radio sounds three
short beeps.
Talkgroup 1
No service
The radio sounds five
beeps, followed by a
repeating double beep.
No answer
The radio sounds two
short beeps.
No answer
The radio sounds two
short beeps.
62 Operating in P25 trunking mode
5 At the completion of the call, or if the dialled
number is busy or does not answer, press the End
left selection key.
If your call is not connected, the way your radio
behaves is explained in the following table.
Explanation
The system is too busy to process your
talkgroup or individual call.
The system is now available to process your
talkgroup or individual call.
You have selected a talkgroup that does not
currently exist on the system. Your display
shows that you have lost service and
Menu
longer appears.
See
You have attempted to make an individual
call to a radio that does not currently exist
on the system.
You have attempted to make an individual or
phone call, but you are not authorized to do
this.
Your individual or phone call has been
rejected or is unanswered.
"Service is lost" on page
no
56.