Resending Calls Automatically - Tait TM9355 User Manual

Resending calls automatically

Deferred calling
76 Operating in conventional mode
The red LED glows and a message appears in the
display.
Sending
uninhibit to
Car 2
Cancel
If the radio has been successfully returned to
operation, an acknowledgement message is
displayed.
Ack received
The uninhibited radio will briefly display Radio
revived.
If an acknowledgement is not received from the
recipient's radio, you will have the option of either
canceling or resending the request.
On an analog channel, your radio may have been
programmed to resend individual and group calls
when transmission is refused because the channel is
busy.
There are two automatic callback features:
■
deferred calling
■
no acknowledgement retries
When you attempt to make a call on a channel that is
busy, the radio can store and send the call once the
channel is free. The radio gives a low-pitched beep if
the channel is busy, and then waits until the channel
is free to retry the call.
OK