Making A Call While Scanning; Suspending A Channel From A Scan Group - Tait TM9100 Series P25 User Manual

Making a call while scanning

If you want to make a call while your radio is scanning:
1 Lift the microphone off the microphone clip.
2 Press the PTT key to transmit.
If the
your radio calls the currently selected channel.
If there has been no recent activity on the channel
(the
flashing), then the channel that is called depends
on the way your radio has been programmed.
The possible options are:
■
■
■
3 When the called party responds, proceed with
your conversation.
Suspending a channel from a
scan group
If a group member is busy for a long time and you do
not want to hear the conversation, you may be able to
use the function key programmed for nuisance delete
to temporarily delete the group member. When the
scan group is next selected, or after the radio has
been turned off and then on, the deleted member is
again part of the scan group.
To temporarily remove a captured group member
from the scan group:
Press the function key programmed for
■
nuisance delete.
icon and the orange LED are flashing,
icon and the orange LED are on rather than
your radio calls a predetermined channel e.g.
your dispatcher
your radio calls the channel where activity was
last detected
your radio calls the last free channel.
Scanning 71