Resending Calls Automatically - Tait TM9300 User Manual

Resending calls automatically

Deferred calling
No acknowledgement retries
56 Operating in conventional mode
1 Press Menu and select Set status.
Main menu
Set status
Dial radio call
Back
2 In the Set status menu, scroll through the list of
status messages until the message you
want appears.
3 Press Select. The message Status updated
appears on the display.
Your radio may have been programmed to resend
individual and group calls when they are not
answered.
There are two automatic callback features:
■ deferred calling
■ no acknowledgement retries
When you attempt to make a call on a channel that is
busy, the radio can store and send the call once the
channel is free. The radio gives a low-pitched beep if
the channel is busy, and then waits until the channel
is free to retry the call.
A deferred calling time limit may have been
configured. Once the time limit has expired the
radio will no longer attempt to retry the call.
To cancel a deferred call:
■ Press the PTT key.
When you send a call and there is no reply, the call is
resent.
Select