Tait TM9100 Series P25 User Manual page 127

Test
RSSI
Rx 1011
Site display
Site measure
Tone test
Tx 1011
Tx 1011 Cal
Tx power test
1. CNV = conventional, TCH = traffic channel, CCH = control channel
2. ANA = analog, PH1 = P25 Phase 1
Description
Displays the received signal strength (RSSI) of the
current channel.
Receives a 1011 Hz Hz tone and displays the
received signal strength (RSSI) and the bit error rate
(BER) of the received signal. Also displays the
channel status (CNV, TCH, CCH
2
(PH1 ).
Shows the channel number, signal strength and
system-identity code (SYSCODE) for the currently
registered trunked site.
Lists the current trunked site (indicated with an
asterisk) and up to six detected adjacent sites, with
received signal strength (RSSI) information.
Generates an audible tone for the duration of the
test.
Transmits a tone of 1011 Hz Hz on the current P25
channel.
Transmits a 1011 Hz Hz tone on the current channel
with a bit error rate (BER) of 5%.
Displays hardware-related information while the
radio is transmitting. Information includes the final
PA current (in mA), and estimated forward and
reverse power levels (in W) along with an indication
of (OK) or (!)
1
) and the mode
Troubleshooting 127