Tait TM9100 Series P25 User Manual page 16

Hide thumbs Also See for TM9100 Series P25:
Table of Contents

Advertisement

Radio installation and operation in
vehicles
Radio protection when charging the
vehicle battery
16
For your safety
Warning Turn off the radio before approaching blasting
caps, a blasting area, or any area where you are
instructed to turn off a two-way radio. Obey all signs and
instructions. Interference with blasting operations could
cause serious injury or death.
Warning Keep the radio away from airbags and airbag
deployment areas. Do not install, charge, or place a radio
near such areas. An activated airbag can propel a
portable radio with sufficient force to cause serious injury
to vehicle occupants. An airbag may not perform to
specification if obstructed by a radio.
Warning To avoid damage to existing wiring, airbags,
fuel tanks, fuel and brake lines, or battery cables, refer to
the installation guide for the radio, and to the vehicle
manufacturer's manual, before installing electronic
equipment in the vehicle.
Using a handheld microphone or a radio while driving a
vehicle may violate the laws and legislation that apply in
your country or state. Please check the vehicle
regulations in your area.
Notice Always remove the fuses from the radio power
cable before charging the vehicle battery, connecting a
second battery, or using power from another vehicle (e.g.
when jump-starting the vehicle).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm9400 series p25

Table of Contents