Receiving A 5-Tone Group Call; Making A 5-Tone Call; Preset 5-Tone Calls; Dialing 5-Tone Calls - Tait t2020 User Manual

Receiving a
5-Tone Group
Call
Making a
5-Tone Call
If you receive a 5-tone group call, your radio only
sounds a single sequence of the ringing tone (burr
burr). The caller then broadcasts a message to all
members of your group. There is usually no need to
respond to 5-tone group calls.
There are two ways to make 5-tone calls on your
T2020:
I preset 5-tone calls, and
I dialed 5-tone calls.

Preset 5-Tone Calls

There are two different types of preset 5-tone calls
that may be programmed for your radio.
I A one touch 5-tone call may be assigned to the
auxiliary key (
auxiliary key.
I A 5-tone call may be associated with each chan-
nel that has 5-tone programmed. To make one
of these calls, change to the desired channel, and
press and hold the call key (
one second.
The transmit indicator (
radio may give a short beep, as the call is transmit-
ted. When the called party responds, proceed with
your conversation.

Dialing 5-Tone Calls

If you are unsure what numbers you can dial, con-
sult your system manager or the person who pro-
grammed your radio.
1. Switch to a channel that has 5-tone programmed
and press the call key (
dialing mode. The last number dialed may appear.
). To make the call, press the
for longer than
)
) appears briefly and the
to enter 5-tone
)
5-Tone Signaling 19