Failsoft Operation - Tait TM9100 Series P25 User Manual

56 Operating in P25 trunking mode
Service is lost
If access to the trunking system is lost,
appears, the bars in the RSSI icon disappear
the display shows No service.
Talkgroup 1
No service
The radio sounds five beeps to indicate the loss of
service, followed by a repeating double beep. The
double beep continues until service is restored.
Site trunking operation
During normal trunking operation, your radio may
roam between a number of sites. This behavior is
transparent to you, unless there is a problem with a
system controller. When this happens, the radio
enters 'site trunking' mode, and you will only be able
to communicate with users within a single site.
While in site trunking mode, the display shows Site
Trunking, and the radio sounds a repeating double
beep. The double beep continues until normal service
is restored.
Site Trunking
Zone 11
When access to the zone controller is available again,
your radio automatically returns to normal multi-site
operation.

Failsoft operation

Your radio may be programmed to enter 'failsoft'
mode when service is lost due to failure of a trunking
site controller. For information about failsoft mode,
see "Failsoft mode operation" on page
Menu
Menu
no longer
and
,
63.