Tait TM9100 Series P25 User Manual page 13

USA public safety bands
(764 –776 MHz and 794 – 806 MHz)
The Code of Federal Regulations (CFR) Title 47
Subpart R deals with the use of frequencies in the 764 to
776 MHz and 794 to 806 MHz bands.
Low-power channels
This radio complies with § 90.531 (b) (3) and
§ 90.531 (b) (4) of 47 CFR. These sections state that only
low-power transmission is permitted on the
following channels:
Regional Planning channels, as defined in
■
§ 90.531 (b) (3).
Itinerant channels, as defined in § 90.531 (b) (4).
■
Use of encryption
This radio complies with § 90.553 (a) of 47 CFR. This
states that:
Encryption is not permitted on the nationwide Interop-
■
erability calling channels. These channels are defined
in § 90.531 (b) (1) (ii).
Radios using encryption must have a readily accessi-
■
ble switch or control to allow the radio user to
disable encryption.
EMC regulatory compliance in
Australia
This product meets all ACMA regulatory requirements for
electromagnetic compatibility (EMC). For more
information about EMC compliance, visit the ACMA
website at www.acma.gov.au.
For your safety 13