Mitel 6863i Release Notes page 54

Mitel 6800 Series SIP Phones 4.2.0 SP1 Release Notes
• Avatar Support: Your own avatar can be viewed on the My Status softkey and avatars for
UC-ONE contacts can be viewed on Favorite softkeys and within the Contacts List.
Notes:
1. Aside from changing your own presence state/status using the My Status feature,
any other changes that need to be made (e.g. adding, removing, or editing contacts
or groups, editing free text, uploading avatar images, etc...) must be made using
the BroadSoft UC-ONE desktop client. Release 4.2.0 SP1 may be compatible with
various versions of the UC-ONE desktop client, but has been tested and verified
using Version 21.2.2.24.
2. The M680i and M685i expansion modules currently do not support this feature.
3. Integration of presence-related features with the phone's Call History application is
currently not supported.
4. Free text for both you and your contacts is not initially updated on the phone upon
a reboot. The phone will reflect free text after a state change is made by you or your
contacts using the UC-ONE desktop client.
5. Changes to avatars are displayed on the phone only after the phone has been
rebooted.
Configuring the SIP Phones for Basic BroadSoft UC-ONE Interoperability
Before configuring the SIP phones for BroadSoft UC-ONE interoperability, ensure the BroadSoft
BroadWorks call manager is configured and the BroadWorks BroadCloud and UC-ONE-related
services are enabled. Additionally, ensure the SIP phones are registered with the proper proxy
and registrar servers and configured with the proper SIP credentials.
Note: Refer to the respective BroadSoft documentation for information on how to
configure the UC-ONE services on the BroadSoft BroadWorks call manager and the
6800 Series SIP Phone Administrator Guide for information on how to configure basic
SIP settings.
After the BroadSoft BroadWorks call manager has been configured and the BroadWorks
BroadCloud and UC-ONE-related services have been enabled, Administrators must enable
basic UC-ONE interoperability on the phone by defining the following parameters:
• instant messaging and presence
• imp user name
• imp password
• imp ip
• imp port
50