Broadsoft Broadworks Simultaneous Ring Personal Support - Mitel 6863i Release Notes

Mitel 6800 Series SIP Phones 4.2.0 SP1 Release Notes
BROADSOFT BROADWORKS SIMULTANEOUS RING PERSONAL
SUPPORT
Note: This feature is applicable to the 6867i, 6869i, and 6873i SIP phones.
Release 4.2.0 SP1 introduces interoperability support for the BroadSoft BroadWorks
Simultaneous Ring Personal service using the BroadSoft BroadWorks Xsi API. The
BroadWorks Simultaneous Ring Personal service allows users the ability to define up to 10
phone numbers or SIP-URIs and independently set which phone numbers should ring when a
call is incoming to their primary phone.
Note: Refer to the respective Xtended Services Platform and BroadSoft BroadWorks
documentation for information on how to configure the Remote Office service on the
BroadSoft BroadWorks call manager.
After configuring the Simultaneous Ring Personal service using the Xtended Services Platform,
Administrators must enable basic Xsi interoperability on the phone by defining the following
Xsi credential parameters:
• xsi ip
• xsi protocol
• xsi port
• xsi user name
Note: For authentication, the Xsi SIP authentication feature can be configured to
automate authentication using users' SIP credentials or, alternatively, users can
authenticate to the Xsi account by manually entering in their credentials through the
native phone UI. For more information on Xsi authentication options, refer to the 6800
Series SIP Phones Administrator Guide.
In addition to the Xsi credential parameters, to specifically enable Simultaneous Ring Personal
support on the phone, Administrators must define the "xsi simultaneous ring personal"
parameter in the respective configuration file as "1". When enabled, users have the ability to
enable and disable simultaneous ring functionality for up to 10 phone numbers. Users can also
specify whether or not simultaneous ringing should occur when on an active call.
14