Mitel 6863i Release Notes page 21

Configuring the Simultaneous Ring Personal Service Using the Phone UI
Use the following procedure on the phone's UI to configure Simultaneous Ring Person service.
For the 6867i/6869i:
1. Press on the phone to enter the Options List.
2. Navigate to the BroadSoft Call Settings > Simultaneous Ring option and press the
button or Select softkey.
3. In the Simultaneous Ring field press the 3 or 4 key enable or disable the service.
4. Press the 2 key to highlight the Do Not Ring if on a Call field and press the
enable this functionality.
5. Press the 2 key to highlight the Phone Num/SIP URI field and using the dialpad keys enter
the phone number or SIP-URI you want to apply simultaneous ring functionality to.
6. Press the 2 key to highlight the corresponding Phone Num/SIP URI checkbox and press
the button to enable simultaneous ring functionality for the respective phone num-
ber/SIP URI.
7. Repeat Steps 5 and 6 for any additional phone numbers or SIP URIs you want to configure.
8. Press the Save softkey to save your changes.
6869i Example
Additional Information
button to
17