Mitel 6863i Release Notes page 34

Mitel 6800 Series SIP Phones 4.2.0 SP1 Release Notes
Configuring PAI Support Using the Configuration Files
Use the following parameter to configure PAI support:
PARAMETER –
sip pai
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
30
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables whether PAI information is displayed on the
phone and specifies which URI field ("sip" or "tel") the phone should
use when displaying the PAI URI information
Integer
1
0 - 4
0 - Disabled: PAI information is ignored.
1 - Use sip URI only: (Default) The phone will use the URI
information contained in the "sip" URI field (if available) and
ignore the information contained in the "tel" URI field (if
available).
2 - sip URI preferred: The phone will use the URI information
contained in the "sip" URI field. If the "sip" URI field is
unavailable, the phone will use the URI information contained in
the "tel" URI field.
3 - Use tel URI only: The phone will use the URI information
contained in the "tel" URI field (if available) and ignore the
information contained in the "sip" URI field (if available).
4 - tel URI preferred: The phone will use the URI information
contained in the "tel" URI field. If the "tel" URI field is unavailable,
the phone will use the URI information contained in the "sip" URI
field.
Note: The default value (i.e. "1") will be enforced if this parameter is
defined with any unsupported value.
sip pai: 3