Instructions For Safe Use - Oce VarioPrint 2090 Safety Manual

Instructions for safe use

Océ designed products have been tested in accordance with the strictest
international safety standards. To help assure safe working with these products
it is important that you observe the following safety rules:
Maintenance
Do not remove any screws from fixed panels.
Do not carry out maintenance activities except for the parts and
maintenance materials mentioned in this manual.
Do not place any liquids on the machine.
Use maintenance materials or other materials for their original purpose
only.
Keep maintenance materials away from children.
Do not mix cleaning fluids or other substances.
To avoid the risk of introducing hazards, all modifications to Océ equipment
are strictly reserved to properly qualified and trained service technicians.
Connection
Do not move the machine yourself, but contact your Customer Service.
If for some reason you have to move the machine yourself, please make sure
that the mains power point has the right fuse capacity. See the Océ
VarioPrint 2090 safety data sheet in this appendix for information about
maximum current.
Do not bridge any mechanical or electrical circuit breakers.
Do not use an extension lead to connect the machine.
It is recommended to connect only those products which meet the
(inter)national product safety and radio frequency interference standards,
and to use an attachment cable as specified by Océ.
This equipment has not been designed for connection to an IT power
system.
(An IT power system is a voltage network in which the neutral wire is not
connected to earth).
For equipment connected via a wall socket: locate the machine close to a
wall socket that is easily accessible.
For equipment connected via a fixed connection to the electricity grid: the
disconnect service in the fixed connection should be easily accessible.
8 Safety manual