Specifications; I.d. No. Location; Removal - Suzuki DR 125 Service Manual

SPECIFICATIONS

ITEM
Carburetor type
Bore size
I.D. No.
Idle r/min.
Float height
Main jet
Jet needle
Needle jet
Throttle valve
Pilot jet
Pilot screw
Throttle cable play
(pulling cable)
E-03: USA E-28: Canada

I.D. NO. LOCATION

Carburetor has I.D. Number 1 printed on the carburetor body
according to its specification.

REMOVAL

• Remove the seat. (!5-2)
• Turn the fuel valve to "OFF" position.
• Remove the fuel tank. (!4-2)
• Disconnect the fuel hose 1, air vent hose 2 and carburetor
overflow hose 3.
• Remove the clamps.
• Remove the carburetor top cap 4.
• Remove the carburetor.
(M.J.)
(J.N.)
(N.J.)
(C.A.)
(P .J.)
(P .S.)
FUEL AND LUBRICATION SYSTEM
SPECIFICATION
E-03, 28
MIKUNI VM20SS
20.0 mm (0.79 in)
08G0
1 700 ± 100 r/min.
18.9 ± 1.0 mm
(0.74 ± 0.04 in)
#102.5
5HGM74-1
N-6M
#2.5
#17.5
PRE-SET
(2-# turns back)
2.0 – 4.0 mm
(0.08 – 0.16 in)
4-5